NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 3 43
Link Configuration Screens
Link Configuration: LAP-B Link Data
Trace file
name (HP modifiable.) Required if link trace is enabled.
Name of the disk file where you want to record tracing.
Must be a valid file name. Enter the file name in the
format filename.groupname.acctname. The fully
qualified file name can be as many as 26 characters.
Lockwords are not allowed for trace files.
Do not specify the same file name with the NMMGR
configuration as specified with the LINKCONTROL
command. Only one active trace is allowed per link.