NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

44 Chapter3
Link Configuration Screens
X.25 Link Configuration
X.25 Link Configuration
The X.25 Link Configuration Screen (#84) in Figure 3-5 is displayed
when you add a link of type X.25 at the Link Selection Screen (Figure
3-2) and press the
[Add] or [Modify] function key. This screen is also
displayed when you type the path name:
@LINK. linkname
in the command window of any screen and press the [Enter] key, where
linkname is a configured X.25 link.
Figure 3-5 X.25 Link Configuration Screen
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or updating. Verify that
the data record has been created by checking that the Data flag is set
to Y.
Fields DTC node
name This is the name of the DTC node where the DTC/X.25
Network Access card is installed. The format for the
name is name.domain.organization. The entire
DTC name can have a maximum number of
50 characters, and each field can have a maximum of
16 characters (alphanumeric, underscore or hyphens)
and is separated from the other fields by periods. The
first character of each field must be alphabetic.