NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

50 Chapter3
Link Configuration Screens
FDDI Link Configuration
If you are unsure of the slot location or of the physical
path number to configure for your system, see your
system documentation or consultyour Hewlett-Packard
service representative.
Use factory-
configured local
station address?
The FDDI adapter is supplied with a 48-bit station
address. These are guaranteed to be unique. Do not
override the factory configured local node address
except on the specific instructions of your network
administrator or your Hewlett-Packard representative.
Default value: Y
Local station
address This field is to be used only with specific instructions
from your network administrator or your
Hewlett-Packard representative. It allows you to enter
a station address to replace the factory configured
address. The format must be compatible with HP
software requirements.