NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

54 Chapter4

Network Transport Conﬁguration Screens

Global Transport Conﬁguration

The Global Transport Conﬁguration screen (#86) in Figure 4-3 is

displayed when you press the

[Go To GLOBAL] function key at the Network

Transport Conﬁguration Selection screen (Figure 4-2). It is also

displayed when you type the path name:

@NETXPORT.GLOBAL

in the command window of any screen and press the [Enter] key.

Figure 4-3 Global Transport Conﬁguration Screen

This screen lets you enter information that is used for transferring

information between nodes. Press the

[Save Data] function key to transfer

the data displayed on the screen to the conﬁguration ﬁle you are

creating or updating. Verify that the data record has been created by

checking that the Data ﬂag is set to Y.

Fields

Home network

name Leave this ﬁeld blank if there are no gateway half

network interfaces conﬁgured and this node will be on

only a single network. Otherwise, enter the network

interface (NI) name of the network that this node will

usually be on.