NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 4 57
Network Transport Configuration Screens
General Protocol Configuration
General Protocol Configuration
The General Protocol Configuration screen (#153) in Figure 4-4 is
displayed when you press the
[Go To GPROT] function key at the Network
Transport Configuration Selection screen (Figure 4-2). It is also
displayed when you type the path name:
@NETXPORT.GPROT
in the command window of any screen and press the [Enter] key.
Figure 4-4 General Protocol Configuration Screen
From this screen you proceed to the screens used to configure the
general protocols of the network transport. The UDP, TCP, and PXP
protocols must be configured for each node.