NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

58 Chapter4
Network Transport Configuration Screens
Packet Exchange Protocol (PXP) Configuration
Packet Exchange Protocol (PXP)
Configuration
The Packet Exchange Protocol (PXP) Configuration screen (#93) in
Figure 4-5 is displayed when you press the
[Go To PXP] function key at the
General Protocol Configuration screen (Figure 4-4). It is also displayed
when you type the path name:
@NETXPORT.GPROT.PXP
in the command window of any screen and press the [Enter] key.
Figure 4-5 Packet Exchange Protocol (PXP) Configuration Screen
This screen contains the information necessary to configure packet
exchange protocol (PXP) for the node. The information configured falls
into two categories:
• Reliability (checksum field).
• Performance parameters (retransmission fields).
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or modifying. Verify
that the data record has been created by checking that the Data flag is
set to Y.