NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

105
6 Point-to-Point (Router) Network
Interface Configuration Screens
The screens in this chapter are those you would see when configuring a
Point-to-Point (router) network. The Point-to-Point Network Interface
Configuration branch of NMMGR begins with a screen called the
Network Interface Configuration screen. Figure 6-1 shows the screen
flow for configuring the Point-to-Point (router) screens. Screens unique
to Point-to-Point are indicated by bold boxed screens.
[FUNCTION]
denotes the function key used at a screen to invoke the next screen on
the screen flow.
Figure 6-1 Point-to-Point Network Interface Configuration Screen Flow
Main Screen
Open Configuration
Directory File
Screen
NS Configuraiton
Unguided
Configuration
Network Transport
Configuration
Selection
Network
Interface
Configuration
Point-to-Point
Network Interface
Configuration
Point-to-Point
Dial Link Config
Neighbor Gateway
Reachable Networks
Point-to-Point
Interface Links
Neighbor Gateways
IP Protocol
Configuration
Dial ID Protocol
Configuration
Protocol
Configuration
If you have not created the
configuration file, then press
OPEN CONFIG key a second time.
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO NETXPORT]
[GO TO NI]
[ADD or MODIFY]
[GO TO DIAL]
[GO TO IP]
[GO TO SECURITY]
[GO TO MAPPING]
[ADD or MODIFY]
[GO TO LINK]
[GO TO PROTOCOL]
[ADD or MODIFY
DD or SD LINK]
[ADD or MODIFY
DC LINK]
Security String(s)
Configuraiton
Point-to-Point
Reachable Nodes
Point-to-Point
Mapping Config
[GO TO INTERNET]
[ADD or MODIFY]
Direct Connect
Link Configuration