NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

108 Chapter6

Point-to-Point (Router) Network Interface Conﬁguration Screens

Point-to-Point Network Interface Conﬁguration

Point-to-Point Network Interface

Conﬁguration

The point-to-point network interface (NI) allows the upper layers of the

transport protocol to communicate with the data link layer. The

Point-to-Point Network Interface Conﬁguration screen (#101) in Figure

6-3 is displayed when you select an NI name of NI type ROUTER at the

Network Interface Conﬁguration screen (Figure 6-2) and press the

[Add] or [Modify] function key. It is also displayed when you type the

path name:

@NETXPORT.NI.NIname

in the Command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured point-to-point NI.

Figure 6-3 Point-to-Point Network Interface Conﬁguration Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. Verify that

the data record has been created by checking that the Data ﬂag is set

to Y.