NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

112 Chapter6
Point-to-Point (Router) Network Interface Configuration Screens
Internet Protocol Configuration
Internet Protocol Configuration
Internet protocol information must be supplied for each configured NI.
The key field in the IP Protocol Configuration screen (#156) shown in is
the IP internet address, which is used in IP routing and datagram
delivery algorithms. Data in the other fields are used for internal
resource allocation and performance tuning. The IP Protocol
Configuration screen is displayed when you press the function key for
[Go To IP] at the Protocol Configuration screen (Figure 6-4). It is also
displayed when you type the path name:
@NETXPORT.NI.NIname.PROTOCOL.IP
in the Command window of any screen and press the
[Enter] key, where
NIname is a configured point-to-point NI.
Figure 6-5 IP Protocol Configuration Screen
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or updating. Verify that
the data record has been created by checking that the Data flag is set
to Y.