NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

120 Chapter6

Point-to-Point (Router) Network Interface Conﬁguration Screens

Point-to-Point Network Interface Links

The Point-to-Point Network Interface Links screen (#119) in Figure 6-8

is displayed when you press the

[Go To LINK] function key at the

Point-to-Point Network Interface Conﬁguration screen (Figure 6-3). It

is also displayed when you type the path name:

@NETXPORT.NI.NIname.LINK

in the Command window of any screen and press the [Enter] key, where

NIname is a conﬁgured point-to-point NI.

Figure 6-8 Point-to-Point Network Interface Links Screen

• To deﬁne a new NI link conﬁguration, specify the link name and link

type; then press the

[Add] function key. The path for the selected link

name is added to the conﬁguration ﬁle, and the data screen on the

path is displayed. Up to 40 network links are supported per

Router NI.

• To modify an existing NI link conﬁguration, specify the link name;

then press the

[Modify] function key. The data screen on the path for

the speciﬁed link is displayed.