NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 6 123

Point-to-Point (Router) Network Interface Conﬁguration Screens

Direct Connect Link Conﬁguration

The Direct Connect Link Conﬁguration screen (#105) supplies the

information required to interface a point-to-point NI to a direct-connect

link (that is, a private line, leased line or other non-switched link). This

screen, shown in Figure 6-9, is displayed when you select an NI link

name and the link type DC at the Point-to-Point Network Interface

Links screen (Figure 6-8) and press the

[Add] or [Modify] function key. It

is also displayed when you type the path name:

@NETXPORT.NI.NIname.LINK.linkname

in the Command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured point-to-point NI, and linkname is a conﬁgured

point-to-point NI link.

Figure 6-9 Direct Connect Link Conﬁguration Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. Verify that

the data record has been created by checking that the Data ﬂag is set

to Y.