NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 6 125

Point-to-Point (Router) Network Interface Conﬁguration Screens

Point-to-Point Dial Link Conﬁguration

Dial link conﬁguration provides the information necessary to interface

the point-to-point NI to a dial link. The Point-to-Point Dial Link

Conﬁguration screen (#104), shown in Figure 6-10, is displayed when

you select an NI link name and link type DD or link type SD at the

Point-to-Point Network Interface Links screen (Figure 6-8) and press

the

[Add] or [Modify] function key. It is also displayed when you type the

path name:

@NETXPORT.NI.NIname.LINK.linkname

in the Command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured point-to-point NI, and linkname is a conﬁgured

point-to-point NI link.

Figure 6-10 Point-to-Point Dial Link Conﬁguration Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. Verify that

the data record has been created by checking that the Data ﬂag is set

to Y.