NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 6 127
Point-to-Point (Router) Network Interface Configuration Screens
Point-to-Point Dial Link Configuration
(see “Related screens”).
Related screen:
• NETXPORT.NI.NIname
Configures point-to-point network interface
information. The value for idle device timeout is
configured on this screen.
Default value: Y
Range: Y or N
Disconnect the link with the DSline Close command (Y/N)
A Y (Yes) value means that NS will immediately
disconnect the dial phone line when the last user enters
a DSLINE nodename;CLOSE command. NS keeps track
of the number of times the DSLINE nodename command
is issued by all users on the system. When the DSLINE
nodename;CLOSE command has been issued this same
number of times, NS checks to see if the dial line to the
remote node is still connected and if there are any TCP
connections still using the line. If the line is connected
and there are no TCP connections, NS disconnects the
line.
An N (No) value means that the dial phone line will
remain connected until the idle device timer expires.
Default value: N
Range: Y or N