NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

143
7 X.25 Network Interface
Configuration Screens
The screens in this chapter are those you would see when configuring
an X.25 network. The X.25 Network Interface Configuration branch of
NMMGR begins with a screen called the Network Interface
Configuration screen. Figure 7-1 shows the screen flow for configuring
the X.25 screens. Screens unique to X.25 are indicated by bold boxed
screens.
[FUNCTION] denotes the function key used at a screen to invoke
the next screen on the screen flow.
Figure 7-1 X.25 Network Interface Configuration Screen Flow
Main Screen
Open Configuration
Directory File
Screen
NS Configuraiton
Unguided
Configuration
Network Transport
Configuration
Selection
Network
Interface
Configuration
X.25 Network
Interface Config
X.25 SVC Address
Key Paths
Neighbor Gateway
Reachable Networks
X.25 Network
Interface Links
Neighbor
Gateways
General X.26
IP Protocol
Configuration
Protocol
Configuration
If you have not created the
configuration file, then press
OPEN CONFIG key a second
time.
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO NETXPORT]
[GO TO NI]
[ADD or MODIFY]
[GO TO IP]
[GO TO X.25]
[GO TO INTERNET]
[GO TO LINK]
[GO TO PROTOCOL]
X.25 Link
Configuration
[ADD or MODIFY]
X.25 PVC Address
Key Paths
X.25 User
Facility Sets
[GO TO PVC PATH]
[GO TO SVC PATH]
X,25 User Facility
Set Parameters
[ADD or MODIFY]
[ADD or MODIFY]
[GO TO FACSET]