NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 7 145
X.25 Network Interface Configuration Screens
Network Interface Configuration
• To change the name of an existing NI configuration, specify the NI
name and a new name; then press the
[Rename] function key. The
previously configured NI name is replaced and the screen displays
the new name in a display field under the label Configured Network
Interfaces.
• To delete an existing NI configuration, specify the NI name; then
press the
[Delete] function key. Press the [Delete] function key again
to confirm the deletion. The previously configured NI name (and the
associated data) is deleted and is no longer displayed in a display
field under the label Configured Network Interfaces.
The network interface provides the interface between the network
transport protocols and the link protocols. It also provides software
loopback capability.
Fields Network interface name
(Required.) This is the name of the network interface
you wish to configure. The name can contain as many
as eight alphanumeric characters. The first character
must be alphabetic.
Default value: None.
Type: (GATEHALF, LAN, LOOP, ROUTER, X.25, TOKEN
or FDDI).
This field is required if you are adding a network
interface. If you are configuring an X.25 NI, select X.25.
New name
(Required only when you are renaming an
existing network interface.) Enter the current name
in the network interface name field. Enter the new
name in the new name field. Press the
[Rename]
function key.