NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

146 Chapter7

X.25 Network Interface Conﬁguration Screens

X.25 Network Interface Conﬁguration

The X.25 Network Interface Conﬁguration screen (#102) in Figure 7-3

is displayed when you add an X.25 interface to the Network Interface

Conﬁguration screen (Figure 7-2) and press the

[Add] or [Modify]

function key. It is also displayed when you type the path name:

@NETXPORT.NI.NIname

in the Command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured X.25 NI.

Figure 7-3 X.25 Network Interface Conﬁguration Screen

Use the ﬁelds and the function keys of the select screen to perform the

desired action. Press the

[Save Data] function key to transfer the data

displayed on the screen to the conﬁguration ﬁle you are creating or

updating. Verify that the data record has been created by checking that

the Data ﬂag is set to Y.