NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

148 Chapter7
X.25 Network Interface Configuration Screens
Protocol Configuration
Protocol Configuration
The Protocol Configuration screen (#113) in Figure 7-4 is displayed
when you press the
[Go To Protocol] function key at the X.25 Network
Interface Configuration screen (Figure 7-3). This screen is also
displayed when you type the path name:
@NETXPORT.NI.NIname.PROTOCOL
in the Command window of any screen and press the [Enter] key, where
NIname is a configured X.25 NI.
Figure 7-4 Protocol Configuration Screen
For the X.25 NI, you configure the X.25 and IP protocols. Choose the
protocol to configure and press the corresponding function key.