NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 7 149

X.25 Network Interface Conﬁguration Screens

General X.25 Conﬁguration

The General X.25 screen (#159) in Figure 7-5 is displayed when you

press the

[Go To X25] function key at the Protocol Conﬁguration screen

(Figure 7-4). It is also displayed when you type the path name:

@NETXPORT.NI.NIname.PROTOCOL.X25

in the Command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured X.25 NI.

Figure 7-5 General X.25 Protocol Screen

Use the ﬁelds and the function keys of the select screen to perform the

desired action. Press the

[Save Data] function key to transfer the data

displayed on the screen to the conﬁguration ﬁle you are creating or

updating. Verify that the data record has been created by checking that

the Data ﬂag is set to Y.