NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

15
Helpful Manuals
This manual is intended as a reference for those who need detailed
information about NS 3000/iX configuration screens and their fields.
Not all parts of the NMMGR screens set are described in this manual.
The following paragraphs describe where to find information about
other aspects of NMMGR and network configuration.
The planning you should do before attempting to configure a network is
discussed in the HP e3000/iX Network Planning and Configuration
Guide.
An introduction to the generic use of the NMMGR utility, including
discussions of the first levels of selection menus and of the utility screen
branch, can be found in Using the Node Management Services (NMS)
Utilities.
The NMMGR screens that are associated with configuring the terminal,
printer, and other serial device connections made through the
Datacommunications and Terminal Controller (DTC) are described in
Configuring Systems for Terminals, Printers, and Other Serial Devices.
The network adapter cards are installed in various I/O slots of the
system. Refer to Appendix E “Verifying Attached Devices” in the System
Startup, Configuration, and Shutdown Reference Manual, for the
procedure on how to determine the physical paths of I/O cards installed
in the system.