NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 7 151

X.25 Network Interface Conﬁguration Screens

X.25 User Facility Sets

The X.25 User Facility Sets screen (#164) in Figure 7-6 is displayed

when you press the

[Go To FACSET] function key at the General X.25

Conﬁguration screen (Figure 7-5). It is also displayed when you type

the path name:

@NETXPORT.NI.NIname.PROTOCOL.X25.FACSET

in the Command window of any screen and press the [Enter] key, where

NIname is a conﬁgured X.25 NI.

Figure 7-6 X.25 User Facility Sets

To edit an existing X.25 facility set, enter the name of the X.25 facility

set to be modiﬁed and press the

[Modify] function key. To add a new X.25

facility set, enter a new facility set name and press the

[Add] function

key.

You may conﬁgure up to 128 User Facility Sets under an X.25 NI.