NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 7 153
X.25 Network Interface Configuration Screens
X.25 User Facility Set Parameters
X.25 User Facility Set Parameters
The X.25 User Facility Set Parameters screen (#161) in Figure 7-7 is
displayed when you press the
[Add] or [Modify] function key at the X.25
User Facility Sets screen (Figure 7-6). It is also displayed when you
type the path name:
@NETXPORT.NI.NIname.PROTOCOL.X25.FACSET.fsetname
in the Command window of any screen and press the [Enter] key, where
NIname is a configured X.25 NI and fsetname is a configured X.25
facility set.
Figure 7-7 X.25 user Facility Set Parameters Screen
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file. Verify that the data record has been
created by checking that the Data flag is set to Y.
Fields Packet size negotiation
(Required.) Enter Y if you want to implement packet
size negotiation. Enter N if you do not wish to
implement packet size negotiation.
Default: N
Range: Y or N