NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 7 155
X.25 Network Interface Configuration Screens
X.25 User Facility Set Parameters
CAUTION Answer Y (Yes) to negotiation only if you subscribed for negotiation.
Some networks will reject a call with negotiation if you did NOT
subscribe for negotiation. Also, if you did subscribe for negotiation, it is
preferable to answer Y because certain networks will clear a call if you
subscribe for negotiation but answer N (No) for negotiation.
Use of D-bit
(Required.) Enter Y if you want to enable delivery
confirmation with this set of circuits. Enter N if you
either do not subscribe to this facility, or do not want
delivery confirmation enabled for this set of circuits.
Accept reverse charge (collect) call
(Required.) Enter Y if you wish to configure the link to
receive reverse charge calls on this set of circuits. Enter
N if you either do not subscribe to this facility, or do not
want to accept reverse charging on this set of circuits.
Default: N
Range: Y or N
Make reverse charge (collect) call
(Required.) Enter Y if all calls sent by this set of
switched virtual circuits (SVC) request reverse
charging. Enter N if you either do not subscribe to this
facility, or do not want reverse charging capabilities
enabled for this set of circuits.
Default: N
Range: Y or N
Table 7-1 Throughput Class and Line Speed
Throughput Class Line Speed
7 1200
8 2400
9 4800
10 9600
11 19200
12 48000