NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 7 161
X.25 Network Interface Configuration Screens
X.25 PVC Address Key Paths
Fields X.25 address key
The X.25 address key is used to identify a remote node
to which this node will communicate. The address key
can have up to eight alphanumeric characters, the first
of which must be alphabetic.
Default: None.
PVC number
The PVC number is a permanent virtual circuit
number which identifies the remote host for the node
you are configuring. This number must be in the PVC
range you defined in the OpenView DTC Manager
configuration. This is a required field if you defined a
corresponding X.25 address key.
Default: None