NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 7 165

X.25 Network Interface Conﬁguration Screens

X.25 Network Interface Links

The X.25 Network Interface Links screen (#151) in Figure 7-11 is

displayed when you press the

[Go To LINK] function key at the X.25

Network Interface Conﬁguration screen (Figure 7-3). It is also

displayed when you type the path name:

@NETXPORT.NI.NIname.LINK

in the command window of any screen and press the [Enter] key, where

NIname is a conﬁgured X.25 NI.

Figure 7-11 X.25 Network Interface Links Screen

Use the ﬁelds and the function keys of this select screen to perform the

desired action.

• To deﬁne a new link conﬁguration, specify the link name; then press

the

[Add] function key. The path for the added link name is put in the

conﬁguration ﬁle, and the data screen on the path is displayed. You

can associate 12 links with a single X.25 NI.

• To modify an existing link conﬁguration, specify the link name; then

press the

[Modify] function key. The next screen for the speciﬁed link

is displayed.