NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

166 Chapter7
X.25 Network Interface Configuration Screens
X.25 Network Interface Links
• To change the link name of an existing link configuration, specify the
link name and a new name; then press the
[Rename] function key.
The previously configured name is replaced, and the screen displays
the new name in a display field under the label Configured Network
Links.
• To delete an existing link configuration, specify the link name; then
press the
[Delete] function key. Press the [Delete] function key again
to confirm the deletion. The previously configured name is deleted
and is no longer displayed in a display field under the label
Configured Network Links.
Fields Link name Make sure this is the same link name configured at the
X.25 Link Configuration screen (path name LINK). This
screen associates the link data with the X.25 network
interface data. The link name can contain as many as
eight alphanumeric characters, and the first character
must be alphabetic.
The link name is used by the network transport when
establishing connections. You can associate up to
twelve (12) links with a single X.25 NI. All links
associated with an NI have equal value (no primary or
secondary weightings are assigned).
New name (Required when renaming an existing X.25 link.)
Enter a link name. This new link name is used in place
of the current link name for an existing link
configuration. The name can contain as many as eight
alphanumeric characters, and the first character must
be alphabetic.