NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

175
8 Token Ring Network Interface
Configuration Screens
The screens in this chapter are those you would see when configuring a
Token Ring network. The Token Ring Network Interface Configuration
branch of NMMGR begins with a screen called the Network Interface
Configuration screen. Figure 8-1 shows the screen flow for configuring
the Token Ring screens. Screens unique to Token Ring are indicated by
bold boxed screens.
[FUNCTION] denotes the function key used at a
screen to invoke the next screen on the screen flow.
Figure 8-1 Token Ring Network Interface Configuration Screen Flow
Main Screen
Open Configuration
Directory File
Screen
NS Configuraiton
Unguided Configuration
Network Transport
Configuration
Selection
Network
Interface
Configuration
Token Ring Network
Interface Config
Neighbor Gateway
Reachable Networks
Token Ring Network
Interface Link
Neighbor
Gateways
IP Protocol
Configuration
ARP
Configuration
Protocol
Configuration
If you have not created the
configuration file, then press
OPEN CONFIG key a second time.
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO NETXPORT]
[GO TO NI]
[ADD or MODIFY]
[GO TO ARP]
[GO TO IP]
[GO TO INTERNET]
[ADD or MODIFY]
[GO TO LINK]
[GO TO PROTOCOL]
NMCONF.PUB.SYS