NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 8 187
Token Ring Network Interface Configuration Screens
Token Ring Network Interface Links
Fields Link name Make sure this is the same link name configured at the
Token Ring Link Configuration screen (#87) (path
name LINK). Press the
[Save Data] function key to save
the link name in the configuration file. Verify that the
link name has been configured by checking that the
Data flag is set to Y.
This screen associates the link data with the Token
Ring network interface data. The link name is used by
the network transport when establishing connections.
The link name can contain as many as eight
alphanumeric characters, and the first character must
be alphabetic.
To change an existing link name, enter the new name
in the Link name field and press the
[Save Data]
function key.