NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 9 207
FDDI Network Interface Configuration Screens
FDDI Network Interface Link
Fields Link name Make sure this is the same link name configured at the
FDDI Link Configuration screen (path name LINK).
Press the
[Save Data] function key to save the link name
in the configuration file. Verify that the link name has
been configured by checking that the Data flag is set
to Y.
This screen associates the link data with the FDDI
network interface data. The link name is used by the
network transport when establishing connections. The
link name can contain as many as eight alphanumeric
characters, and the first character must be alphabetic.
To change an existing link name, enter the new name
in the Link name field and press the
[Save Data]
function key.