NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

215
10 Gateway Half Network Interface
Configuration Screens
The screens in this chapter are those you would see when configuring a
Gateway Half network. The Gateway Half Network Interface
Configuration branch of NMMGR begins with a screen called the
Network Interface Configuration screen. Figure 10-1 shows the screen
flow for configuring the Gateway Half screens. Screens unique to
Gateway Half are indicated by bold boxed screens.
[FUNCTION] denotes
the function key used at a screen to invoke the next screen on the
screen flow.
Figure 10-1 Gateway Half Network Interface Configuration Screen Flow
Main Screen
Open Configuration
Directory File
Screen
NS Configuraiton
Unguided
Configuration
Network Transport
Configuration
Selection
Network
Interface
Configuration
Gateway Half
Network Interface
Configuration
Direct Connect
Link Configuration
Gateway Half
Dial Link Configuration
Neighbor Gateway
Reachable Networks
Gateway Half
Network Interface
Link
Security String(s)
Relocatable Networkes
Network Interfaces
IP Protocol
Configuration
Dial ID Protocol
Configuration
Protocol
Configuration
If you have not created the
configuration file, then press
OPEN CONFIG key a second
time.
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO NETXPORT]
[GO TO NI]
[ADD or MODIFY]]
[GO TO DIAL]
[GO TO IP]
[GO TO SECURITY]
[GO TO INTERNET]
[ADD or MODIFY]
[GO TO LINK]
[GO TO PROTOCOL]
[ADD or MODIFY
DD LINK]
[ADD or MODIFY
DC LINK]
Security String(s)
Configuraiton