NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

218 Chapter10

Gateway Half Network Interface Conﬁguration Screens

Gateway Half Network Interface Conﬁguration

Gateway Half Network Interface

Conﬁguration

The gateway half network interface (NI) interfaces the upper layers of

the transport protocol to the data link layer. The Gateway Half

Network Interface Conﬁguration screen (#98) shown in Figure 10-3

supplies the information required for that interface. The screen is

displayed when you select an NI name of type GATEHALF at the Network

Interface Conﬁguration screen (Figure 10-2) and press the

[Add] or

[Modify] function key. It is also displayed when you type the path name:

@NETXPORT.NI.NIname

in the command window of any screen and press the

[Enter] key, where

the NIname is a conﬁgured gateway half NI.

Figure 10-3 Gateway Half Network Interface Conﬁguration Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. You verify

that the data record has been created by checking that the Data ﬂag is

set to Y.

From this screen you proceed to the screens used to conﬁgure the

gateway-half network interface.