NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

228 Chapter10
Gateway Half Network Interface Configuration Screens
Security String(s) Configuration
Fields Configured security strings
Enter the security string that remote nodes must use to
gain dial link access to the node you are configuring.
The string can contain up to eight alphanumeric
characters, left justified, with no embedded blanks.
Default value: HP
Related screen:
• NETXPORT.NI.NIname.LINK.linkname
The dial ID protocol is enabled/disabled on this
screen.
NOTE To delete a security string, blank out the field that contains the string
you want deleted, and press [Save Data].