NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 10 233

Gateway Half Network Interface Conﬁguration Screens

Gateway Half Dial Link Conﬁguration

Dial link conﬁguration provides the information necessary to interface

the gateway-half NI to a dial link. The Gateway Half Dial Link

Conﬁguration screen (#109), shown in Figure 10-10, is displayed when

you select an NI link name and link type DD at the Gateway Half

Network Interface Link screen (Figure 10-8) and press the

[Add] or

[Modify] function key. It is also displayed when you type the path name:

@NETXPORT.NI.NIname.LINK.linkname

in the command window of any screen and press the

[Enter] key, where

NIname is the conﬁgured gateway-half NI, and linkname is the

conﬁgured gateway half NI link.

Figure 10-10 Gateway Half Dial Link Conﬁguration Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. Verify that

the data record has been created by checking that the Data ﬂag is set

to Y.