NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 10 237
Gateway Half Network Interface Configuration Screens
Neighbor Gateways
• To change the gateway name of an existing gateway configuration,
specify the gateway name and a new name; then press the
[Rename]
function key. The previously configured name is replaced, and the
screen displays the new name in a display field under the label
Configured Gateways.
• To delete an existing gateway configuration specify the gateway
name, then press the
[Delete] function key. Press the [Delete] function
key again to confirm the deletion. The previously configured name is
deleted and is no longer displayed in a display field under the label
Configured Gateways.
Fields Gateway name
Enter a name to represent this node’s partner gateway
half, through which one or more remote networks can
be reached. Using the remote node’s node name may
help you keep track of gateways.
A gateway name can contain as many as eight
alphanumeric characters. The first character must be
alphabetic.
New name
(Required only when renaming an existing
gateway half.) Enter the name of an existing gateway
in the gateway name field and enter a new gateway
name in this field. Press the
[Rename] function key. This
new gateway name is used in place of the current
gateway name for an existing gateway configuration.
The name can contain as many as eight alphanumeric
characters. The first character must be alphabetic.