NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

238 Chapter10

Gateway Half Network Interface Conﬁguration Screens

Neighbor Gateway Reachable Networks

The Neighbor Gateway Reachable Networks screen (#158) is used to

enter internet routing information. It supplies the internet address of a

neighbor internet gateway, lists addresses of remote networks which

are reachable through that gateway, and gives the distances to those

remote networks. For the gateway half NI there is only one neighbor

gateway: the partner gateway half. The screen in Figure 10-12 is

displayed when you select a gateway name at the Neighbor Gateways

screen (Figure 10-11) and press the

[Add] or [Modify] function key. It is

also displayed when you type the path name:

@NETXPORT.NI.NIname.INTERNET.gatewayn

in the command window of any screen and press the

[Enter] key, where

NIname is the conﬁgured gateway-half NI, and gatewayn is the

conﬁgured gateway.

Figure 10-12 Neighbor Gateway Reachable Networks Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. Verify that

the data record has been created by checking that the Data ﬂag is set

to Y.