NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

243
11 Loopback Network Interface
Configuration Screens
The screens in this chapter are those you would see when configuring a
Loopback network. The Loopback Network Interface Configuration
branch of NMMGR begins with a screen called the Loopback Network
Interface Configuration screen. Figure 11-1 shows the screen flow for
configuring the Loopback screens. Screens unique to Loopback are
indicated by bold boxed screens.
[FUNCTION] denotes the function key
used at a screen to invoke the next screen on the screen flow.
Figure 11-1 Loopback Network Interface Configuration Screen Flow
Open Config/
Directory File Screen
Main Screen
NS Config
Loopback Network
Inteface Config
Unguided Config
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO NI]
[ADD or MODIFY]
If you have not created the
config file, then press the
OPEN CONFIG key a second
time.
Network Transport
Config Selection
[GO TO NETXPORT]
Network Interface
Config