NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

249
12 Logging Configuration Screens
The screens in this chapter are those you would see when configuring
logging. The Logging Configuration branch of NMMGR begins with a
screen called the Netxport Log Configuration screen. Figure 12-1 shows
the screen flow for configuring the logging screens. Screens unique to
logging are indicated by bold boxed screens.
[FUNCTION] denotes the
function key used at a screen to invoke the next screen on the screen
flow.
Figure 12-1 Logging Configuration Screen Flow
Network Log
Config (6)
[NEXT SCREEN]
[NEXT SCREEN]
Network Log
Config (5)
Main Screen
NS Config
Network Log
Config (2)
Unguided Config
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO LOGGING]
[NEXT SCREEN]
If you have not created the
config file, then press the
OPEN CONFIG key a
second time.
Network Log
Config (1)
Network Log
Config (4)
[NEXT SCREEN]
[NEXT SCREEN]
Network Log
Config (3)
To enable users for individual logging
classes, in the command window of any
screen, type the path name:
@LOGGING.SUB
nnnn. CLAS nnnn and
hit enter.
[EXIT LOGGING]
[PRV LOG SCREEN]
[PRV LOG SCREEN]
[PRV LOG SCREEN]
[PRV LOG SCREEN]
[PRV LOG SCREEN]
Network Log
Config (7)
[NEXT SCREEN]
[PRV LOG SCREEN]
Open Config/
Directory File Screen
Logging Config:
Class Data