NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

258 Chapter12
Logging Configuration Screens
NETXPORT Log Configuration
Figure 12-6 Netxport Log Configuration (5) Screen
Use the fields and the function keys of the screen to configure logging
for the subsystems represented on the screen. If the subsystem for
which you want to enable logging does not appear on this screen, press
the
[Next Screen] function key to go to the next Netxport Log
Configuration screen. There are a total of six logging configuration
screens.
Enable or disable logging classes (or accept HP-recommended defaults).
Press the
[Save Data] key on each screen to create or modify the data
record. Verify that the data record has been created by checking that
the Data flag is Y.
Press the
[Exit Logging] function key when you have finished modifying
the logging configuration.
For more information on logging classes and subsystems see the
NS 3000/iX Operations and Maintenance Reference Manual.
Fields Console logging
The value entered in this field specifies whether or not
logging events for the subsystem and class listed beside
the field will be logged to the system console. A value
must be entered for each subsystem and class listed. A
Y (yes) enables logging to the console, N (no) disables
logging to the console.