NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

262 Chapter12

Logging Conﬁguration Screens

Enabling Users for Individual Logging Classes

The logging screens described in this chapter make it possible to

completely conﬁgure logging for all subsystems by traversing only six

screens. However, using these screens, it is not possible to conﬁgure

logging so that messages generated by speciﬁc logging classes are sent

to an individual user’s list device. The Logging Conﬁguration: Class

Data screen (#67) is shown in Figure 12-9.

Figure 12-9 Logging Conﬁguration: Class Data Screen

The following steps describe the method used to conﬁguring users to

receive logging messages. Using this method, you can create a

conﬁguration that allows messages from a single logging class, or a set

of classes, to be sent to a user’s list device.

To do so, you access and update the Logging Conﬁguration Class Data

screen according to the following steps:

Step 1. Type the path name:

@LOGGING.SUBnnnn.CLASnnnn

in the command window of any screen and press the

[Enter] key, where

SUBnnnn is the subsystem ID and CLASnnnn is the class name of the

logging class you want directed to the user’s list device. The Logging

Conﬁguration: Class Data screen shown in Figure 12-9 is displayed.

For example, subsystem 77, class 2 would be entered as:

@LOGGING.SUB0077.CLASS0002