NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

272 Chapter13
Network Directory
Network Directory Main
Network Directory Main
The Network Directory Main screen (#8) shown in Figure 13-3 is
displayed when you press the
[Open Directry] or the [Create Directry]
function key at the Open Configuration/Directory File screen (#1) as
shown in Figure 2-2. This screen is also displayed if a network directory
has already been opened and you type NETDIR in the command window
of any screen and press the
[Enter] key.
Figure 13-3 Network Directory Main Screen
This screen is the main select screen from which all directory functions
are accessed. The currently opened directory is displayed at the bottom
of all network directory screens. The percentage of the network
directory that is full is shown in the lower right corner of the screen.
Press the
[Update Dir] function key to modify the contents of the
directory by adding, deleting and updating node names and path
reports.
Press the
[Print Dir] function key to print out a copy of the directory to
formal designator FORMLIST, device class LP. You can use a file equation
for FORMLIST to redirect the output to another device class or disk file.
To set a file equation without leaving NMMGR, enter the appropriate
MPE command, preceded by a colon (:), in the command window and
press the
[Enter] key.