NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 13 277

Network Directory

Network Directory Data

The Network Directory Data screen (#10) shown in Figure 13-5 is

displayed when you press the

[Add] or [Modify] function key at the

Network Directory Select Node Name screen (Figure 13-4).

Figure 13-5 Network Directory Data Screen

The function of this screen is to conﬁgure path report data for the node

name listed at the top of the screen. One path report is conﬁgured for

each NI on a node.

To delete a path report, clear all three path report ﬁelds to blanks and

press

[Save Data].

Fields Transport

services These three ﬁelds describe the transport services that

should be conﬁgured in each path.

TCP TCP must be Y (yes) for all nodes. The

default is Y.

Checksum

for TCP The checksum setting indicates

whether checksumming is optional (N)

or required (Y) for TCP. If this ﬁeld is

set to N, then the use of checksums is

not requested when communicating

with this node. If this ﬁeld is set to Y