NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

281
Glossary
A
access port A special interface
card in the system cabinet
through which the system console
is connected.
address A numerical identifier
defined and used by a particular
protocol and associated software
to distinguish one node from
another.
address key See X.25 address
key.
address resolution In NS
networks, the mapping of node
names to IP addresses and the
mapping of IP addresses to link
level addresses.
address resolution protocol
(ARP) A protocol used by LAN
links with Ethernet enabled that
provides a means of exchanging
addressing information between
Ethernet nodes.
adjacent A node on a
point-to-point network that is
connected to another node by a
single link with no intervening
nodes.
ARP See address resolution
protocol.
ASCII American National
Standard Code for Information
Interchange. A character set
using 7-bit code used for
information interchange among
data processing and data
communications systems. The
American implementation of
International Alphabet No. 5.
asynchronous A device’s mode
of operation in which a sequence
of operations are executed
irrespective of time coincidence
with any event. Devices that are
directly accessible by people (for
example, terminal keyboards)
operate in this manner.
Attachment Unit Interface
AUI. The cable that runs between
each node (host, DTC, or other
device) and the Medium
Attachment Unit (MAU) that
connects it to the LAN in a
ThickLAN configuration.
AUI See Attachment Unit
Interface.
autodial A dial link in which the
remote node’s telephone number
is automatically dialed by a
modem or other device with this
capability.
B
backbone LAN A thick LAN
cable conforming to the
IEEE 802.3 Type 10 BASE 5
Standard.
back-to-back configuration A
DTC configuration whereby MPE
users connected to one DTC can
communicate with a non-MPE/iX
system connected to another DTC
via the LAN. See also local
switching.
backup configuration file A
file that contains a copy of the