NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

38 Chapter3
Link Configuration Screens
LAN Link Configuration
LAN Link Configuration
The LAN Link Configuration screen (#82) in Figure 3-3 is displayed
when you select a link name of type LAN at the Link Selection screen
(Figure 3-2) and press the
[Add] or [Modify] function key. It is also
displayed when you type the path name:
@LINK.linkname
in the command window of any screen and press the
[Enter] key, where
linkname is the name of a configured LAN link.
Figure 3-3 LAN Link Configuration Screen
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or updating. Verify that
the data record has been created by checking that the Data flag is set
to Y.
Fields Physical path of device adapter
The physical path number corresponds to the slot
location of the node’s local area network interface
controller (LANIC) card. For HP e3000 systems, the
path is derived by a basic formula of 4 x slot number.
(Example: 4 x 10 = 40, where the LANIC card is
installed in slot number 10 and the physical path of the
card is 40.)