NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

40 Chapter3

Link Conﬁguration Screens

Link Conﬁguration: LAPBMUX Link Data

The Link Conﬁguration: LAPBMUX Link Data screen (#351) in Figure

3-4 is displayed when you select a link name of type LAPBMUX at the

Link Selection screen (Figure 3-2) and press the

[Add] or [Modify]

function key. It is also displayed when you type the path name:

@LINK.linkname

in the command window of any screen and press the

[Enter] key, where

linkname is a conﬁgured LAPBMUX link.

Figure 3-4 Link Conﬁguration: LAPBMUX Link Data Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or modifying. Verify

that the data record has been created by checking that the Data ﬂag is

set to Y.