NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 3 45
Link Configuration Screens
Link Configuration: LAPBMUX Link Data
filename.groupname.acctname. The fully qualified
file name can be as many as 26 characters.
Lockwords are not allowed for trace files.
Do not specify the same file name with the NMMGR
configuration as specified with the LINKCONTROL
command. Only one active trace is allowed per link.
Modulo count:
This parameter specifies a window representing the
number of frames that can be outstanding.
Default: 8
Range: 8 or 128
Window size K:
This parameter specifies the maximum number of
sequentially numbered frames that the configured node
may have unacknowledged at any given time. This
parameter is also call the Level 2 window size.
Default value: 7
Range 1–127