NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

50 Chapter3
Link Configuration Screens
Link Configuration: LAP-B Link Data
64000 bits/second
Trace at startup
(HP modifiable.) Enter Y (YES) to enable link tracing
at link startup, N (NO) otherwise. This value can be
overridden with the LINKCONTROL command.
If you do enable link tracing, you are required to enter a
trace file name. For best performance, do not enable
tracing.
Default value: N
Trace file name
(HP modifiable.) Required if link trace is enabled.
Name of the disk file where you want to record tracing.
Must be a valid file name. Enter the file name in the
format filename.groupname.acctname. The fully
qualified file name can be as many as 26 characters.
Lockwords are not allowed for trace files.
Do not specify the same file name with the NMMGR
configuration as specified with the LINKCONTROL
command. Only one active trace is allowed per link.