NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 3 51

Link Conﬁguration Screens

X.25 Link Conﬁguration

The X.25 Link Conﬁguration Screen (#84) in Figure 3-6 is displayed

when you add a link of type X.25 at the Link Selection Screen (Figure

3-2) and press the

[Add] or [Modify] function key. This screen is also

displayed when you type the path name:

@LINK.linkname

in the command window of any screen and press the

[Enter] key, where

linkname is a conﬁgured X.25 link.

Figure 3-6 X.25 Link Conﬁguration Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. Verify that

the data record has been created by checking that the Data ﬂag is set

to Y.

Fields DTC node name

This is the name of the DTC node where the DTC/X.25

Network Access card is installed. The format for the

name is name.domain.organization. The entire DTC

name can have a maximum number of 50 characters,

and each ﬁeld can have a maximum of 16 characters

(alphanumeric, underscore or hyphens) and is

separated from the other ﬁelds by periods. The ﬁrst

character of each ﬁeld must be alphabetic.