NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

52 Chapter3

Link Conﬁguration Screens

X.25 Link Conﬁguration

Each DTC must have a unique name within the local

network, and the name.domain portion of the DTC

name must be unique for each DTC within the

internetwork. HP recommends that all nodes on the

same network be assigned the same domain and

organization.

The DTC node name must match the name conﬁgured

at the DTC Node Name screen under DTS

conﬁguration. Refer to Conﬁguring Systems for

Terminals, Printers, and Other Serial Devices for more

information about conﬁguring the DTC.

DTC card number

(Required.) Enter the DTC card number. The DTC

card number is the number of the slot in the DTC

where the DTC/X.25 Network Access card for this node

resides. Slot 0 of the DTC is reserved and cannot be

used by a DTC/X.25 Network Access card. A DTC can

be conﬁgured with a maximum of 3 DTC/X.25 Network

Access cards.

Make sure that the DTC is already conﬁgured before

you conﬁgure an X.25 link on the HP e3000. Refer to

Conﬁguring Systems for Terminals, Printers, and Other

Serial Devices and Using the OpenView DTC Manager

for complete information on conﬁguring the DTC.

Default: None.

Range: 1–5