NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 3 53
Link Configuration Screens
Token Ring Link Configuration
Token Ring Link Configuration
The Token Ring Link Configuration screen (#87) in Figure 3-7 is
displayed when you select a link name of type TOKEN at the Link
Selection screen (Figure 3-2) and press the
[Add] or [Modify] function
key. It is also displayed when you type the path name:
@LINK.linkname
in the command window of any screen and press the
[Enter] key, where
linkname is the name of a configured Token Ring link.
Figure 3-7 Token Ring Link Configuration Screen
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or updating. Verify that
the data record has been created by checking that the Data flag is set
to Y.