NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

Chapter 3 55
Link Configuration Screens
Token Ring Link Configuration
NOTE If the same Token Ring card is being used for both NS and SNA
communications, you must specify the local station address that is
configured for the SNA Token Ring link.
Local station address
This field is to be used only with specific instructions
from your network administrator or your
Hewlett-Packard representative. It allows you to enter
a station address to replace the factory configured
address. The format must be compatible with HP
software requirements.
NOTE If the same Token Ring card is being used for both NS and SNA
communications, you must specify the local station address that is
configured for the SNA Link.