NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

65
4 Network Transport
Configuration Screens
This section contains information about the NMMGR configuration
screens that are common to all network interfaces. The network
transport configuration branch of NMMGR begins with a screen called
the Network Transport Configuration Selection screen. Figure 4-1
shows the screen flow for configuring the Network Transport
Configuration screens. Screens unique to the Network Transport
Configuration are indicated by bold boxed screens.
[FUNCTION] denotes
the function key used at a screen to invoke the next screen on the
screen flow
Figure 4-1 Network Transport Configuration Screen Flow
Open Config/
Directory File Screen
Main Screen
NS Config
General Protocol
Config
Unguided Config
[OPEN CONFIG]
[NS]
[UNGUIDED]
[GO TO NETXPORT]
[GO TO GPROT]
If you have not created the
config file, then press the
OPEN CONFIG key a second
time.
Network Transport
Config Selection
(Selected link type)
Link Config
(Selected link type)
Link Config
PXP Config
TCP Config
[GO TO GLOBAL] [GO TO NI]
[GO TO PXP]
[GO TO TCP]